|
INCRA Precision T-Rules
Part Number: T-RULE06, T-RULE12, T-RULE18, TINYT03,
T-RULE150M,
T-RULE300M,
TDPROT06 & TDPROT12 |
|
|
 |
INCRA T-Rules make it very easy to draw exact
lines in either direction.
INCRA scores again with
its precision steel rule ... Select the proper slot or hole,
insert a .5mm mechanical pencil, and mark the
measurement with dead-on accuracy. |
Micro-fine guide holes and slots at every 1/16", 1/32"
and 1/64" scale position instantly locate your sharp
pencil or scribe at the exact measurement with zero
uncertainty and no eye strain! Our Professional T-Rules
even offer marking holes every 1/100". This is unmatched in the industry.
|
|
|
 |
T-Rules (imperial)
This is our regularT-Rule shown here is the 6 inch
version. It is also available in 12 and 18 inch
lengths. This rule offers Incra's patented marking
holes at every 1/16th, 32nd, and 64th from 0 to 6
inches. All three lengths also offer 0 to 3" height
markings on the end in 32nds. This T-Rule is also
available in our combination pack Rule Sets.
|
|
|
|
"Tiny" T-Rules
This is our pocket sized Tiny T-Rule. Measuring only
3" by 4.5". It offers Incra's patented marking holes
at every 1/16th, 32nd, and 64th from 0 to 3 inches.
It also has slotted height marking holes at every
32nd on the end. This size is so handy many of our
customers keep it in their pocket anytime they are
in the shop. These rules are also available in
quantity for customization with your company logo.
|
|
|
|
T-Rules (metric)
This is our Metric T-Rule shown here is the 150mm
version. It is also available in a 300mm length.
These rules offer Incra's patented marking holes at
every full, 1/4, 1/2 and 3/4mm from 0 to 150mm.
They also offer 0 to 50mm height marking slots on
the end in millimeters.
|
|
|
|
Professional T-Rules
The Professional version of our patented T-Rules is
shown here in the 6 inch/150mm version. This is
the most versatile and precise rule we offer. These
Professional T-Rules are also available in 12
inch/300mm lengths and both lengths offer Incra's
patented marking holes at every 1/16th, 32nd, 64th &1/100th inch. But they are also bilingual because
they have marking holes at every .5mm as well!
The end features 3 vertical inches of marking holes
at every 32nd. You will never be without the correct
measurement with these beauties. This T-Rule is
also available in our combination pack Rule Sets.
These rules may be ordered in quantity for customization with your company logo.
|
|
|
