|     |  |
INCRA
Jig Ultra Lite System Part
Number: ULTRALITESYS | | You've
wanted the INCRA Jig Ultra for a long time, but you still don't own one. Sound
familiar? Well, your wait just paid off. Our new woodworking jig is packed with
most of the best features of its famous big brother, the INCRA Jig Ultra, into
a refined, more compact unit that's heavy on capabilities, but Ultra Lite on price. Fine
Joinery has Never Been Easier With
the INCRA Jig ULTRA Lite on the router table even the novice woodworker can produce
joinery which surpasses that made on even the most expensive dovetail jigs - for
a fraction of the cost. Just about any joint is possible - box joints, half blind,
sliding, and through dovetails, even INCRA's trademark Double and Double-Double
Joints. Just set the jig to the color coded reference marks and make your cuts.
No math, no measurements, and no complicated setups necessary. With INCRA's patented
positioning racks there is never any question about your cut being exactly right.
If you want to make drawers, craft items, or family heirlooms, the INCRA Jig ULTRA
Lite will make your work easier and better than you've every imagined.
For
even more template patterns, get the INCRA Master Reference Guide & Template
Library as shown below. | | | | Complete
Ultra Lite System Package Includes: | 
INCRA Jig ULTRA Lite (12 1/2" range) | |
22" INCRA Fence | |
Sliding Fence Stop | |
INCRA Right Angle Fixture | |
2 template patterns - the 3/8" box joint and 1/2" dovetail templates |
The carriage has 3 sliding scale or template channels. One channel for the
primary
scale. The other two are for template patterns |
Note:
The
red mounting board shown in photos is not included. You can use any type of
3/4"
plywood. |
| | | | Included
in the Wonder Fence | | Includes
machined flat split in-feed and out-feed fences, highrise fence cap, base fence,
dust collection port, offset wedges, and table mounting clamps. (Base fence replaces
the fence on TS-I, II, or III systems) | | | | Two
tools, one workstation! | | If
you are tight on space, just mount the Wonder Fence by INCRA to the TS-III Fence,
insert a router table extension wing (available thru Woodpeckers) and you'll be
able to make just about every type of woodworking joinery imaginable without ever
switching workstations. Order the INCRA Right Angle Fixture, the INCRA Shop Stop
and the INCRA Master Reference Guide and 51-piece Template Library and you'll
get all the components to make joinery right on your table saw. The dust collection
port rides to the side of the table, so there is no interference with the movement
of the fence. Then just slide the Wonder Fence off to use the INCRA TS-III on
your table saw. | | | | | | | | | |  |  | INCRA
Positioning Racks
INCRA's patented sawtooth racks position your work instantly
and automatically in EXACT 1/32" steps. A micrometer dial fine-tunes your
position even more precisely
with an incredible 1/1000" increment. This
is just one of
the innovations that make the Ultra so accurate. Even buried
in sawdust, the INCRA Jig Ultra continues to operate smoothly, unlike old-fashioned
machines that depend on rollers. The racks are made of a polycarbonate material
-- this is the same material that is used for bullet proof glass! It's so durable
we guarantee the INCRA positioning racks forever. | |
| | | | Automatic
Positioning Control
INCRA's sophisticated Automatic Positioning Control
instantly locates each cut to within one or two thousandths of an inch without
measuring!
The rotating micro adjust scale can be turned under the cursor
to establish a zero reference point at any position. Great for zeroing, centering
or working with offsets.
Keeps track of the distance you've micro adjusted
and which way you've gone. Lets you return to your original position with no loss
of accuracy. | |
|
|
| |
