|
 Part
Number: RT2743OS |  | | | |
Part
Number: RT2436OS |  | | | |
Part
Number: RT2432CM |  | Free
Standing Router Table Tops

All
of INCRA's new lineup of heavy duty router table tops feature a 1-1/4" MDF
substrate with a high pressure horizontal grade phenolic laminate top and bottom.
With a total thickness of 1-3/8", these tops are designed to support even
the heaviest of production routers and lifts, and will work with any standard
9-1/4" x 11-3/4" mounting plate.Rather
than the typical router plate leveling set screws that dig into the table's recess
requiring constant re-adjustment, Incra's plate leveling system puts flat head
levelers in the table, not in the router mounting plate. Access to these levelers
is through the 10 access holes located around the perimeter of the mounting plate.
Just insert the hex key in the access holes and turn to adjust. After leveling,
a simple quarter turn of the corner mounted Cam-Lock securely holds the plate
in the router table's recess. All
INCRA
Router Tables are shipped with a 3/8" solid aluminum router mounting plate,
pre-drilled for your router, featuring the exclusive Magna-Lock magnetic throat
plate system. Changing any of the included throat plates is a snap with the Magna
Lock System. Just drop in the selected plate. The high energy, rare-earth magnets
hold the plate secure and perfectly flush every time. All of our mounting plates
include 3 laser cut throat plates with a 1", 2-1/8" and 3-5/8"
opening.
Note:
Specify your router preference when placing an order with your Incra dealer. (See
models listed below) |
| |
Model# |
Fits
Routers |
| |
MLP1613-AL |
Bosch
1613 |
| |
MLP1619-AL |
Bosch
1619 |
| |
MLP3612C-AL |
Makita
3612C |
| |
MLP621625-AL |
Bosch
1611EVS, DeWalt 621, 625,
Fein RT1800 |
| |
MLP690890-AL
|
PC
690, 890, 7529, Makita 1101,
Bosch 1617, 1618
Milwaukee 5616, Dewalt 618 |
| |
MLP7518-AL |
PC
7518, 7539, Triton TRC-001,
TRA-001 &
M0F-001KC |
| |
MLPFT2000-AL |
Freud
FT-2000 |
| |
MLPM12V-AL |
Hitachi
M12V |
| |
MLPUNDRILLED-AL |
Undrilled |
| Available
in 3 sizes for a free standing application. The 24" x 36" offset style
table is a compact choice perfect for the LS-Positioner 17" model, the Ultra
16 or the Ultra Lite. The larger 27" x 43" offset style is the best
choice for the LS-Positioner 25" model and the Ultra 24. The larger work
envelope of the 27" x 43" is favored by many for use with the smaller
range positioners as well. And all of our offset style tables are factory pre-drilled
for mounting the LS Positioner direct. The 24" x 32" center mount table
is a good choice if you are interested in using the Wonderfence37 fence without
a positioner.
INCRA
24" x 32" Center Mount Router Table Top
INCRA
27"
x 43" Offset Router Table Top
INCRA
24" x 36" Offset Router Table Top |  | |
| |  | In
the table plate leveling system.
| | 3/8"
x ¾" T-Slot Miter Channel.
|  | Cam-Lock
1/4 turn plate locking.
|  | Solid
Aluminum Mounting Plate w/Magna Lock Throat plate System. |
| Incra
Mast-R- Lift upgrade - Substitute the Incra Mast-R-Lift for the
standard mounting plate and save $40.00 on the combined purchase.
| ML
Ring Set - Set of 8 reducer rings as follows: 3/8", 5/8", 7/8",
1-3/8", 1-5/8", 1-7/8", 2-5/8", and 3-3/8".
|  | TS
Leg Set. | |