|
INCRA
PRL-V2 Lift
Part Number: INCRA PRL-V2
LIFT
|
 |
The
family of MagnaLOCK router table products is growing!
The concept is like nothing else: To raise or lower
the router quickly, the quick lifting tool disengages
the lift’s mechanism and the spring assist
allows the heaviest routers to travel freely with
very light effort and no cranking. The router’s
collet can be raised above the table for bit changes
in two seconds!
The quick adjuster provides the speed, and the tool-free
micro adjust provides the finesse. After the router
bit height is in the ballpark, no tools are necessary
for fine tuning. A large thumbwheel embedded in
the lift’s top plate is instantly accessible
for micro adjusting anywhere within a 3/8”
range of travel. The travel indicator dial is graduated
every .002” and can be reset to zero. A carriage
brake is also available right next to the micro
adjust thumbwheel for locking the carriage during
extended cutting.
As with our custom INCRA Mast-R-Lift-II, the PRL-V2’s
top plate is a super flat Blanchard-ground casting
that’s machined to accept INCRA’S unique
MagnaLOCK reducing ring system. The laser-cut steel
rings are securely held in with powerful rare earth
magnets for super fast ring changes, and a simple
leveling system guarantees that the rings will snap
in absolutely flush with the surrounding plate.
The MagnaLOCK system is simply the most convenient,
best performing reducing ring style available. Includes
five reducing rings for great variety right out
of the box: 3/8", 1", 1-5/8", 2-5/8",
& 3-5/8”. |
 |
Compatibility:
The PRL-V2’s massive, one-piece carriage comes
ready to accept the 3hp motor from the Milwaukee
5625-20 fixed base router, and optional motor mounting
pads are available to accommodate the smaller Porter-Cable
890 series routers as well as the Bosch 1617 &
1618 motors. |
| |
| |
|
|
