|
|
 |
|
|
INCRA
28" x 21" TS Router Table Top with TSRTHW
Part Number: TSRT2821L |
|
|
|
Designed specifically
as an accessory to the TS-LS and TS-III saw fence
systems, this 28" x 21" router table replaces
the left-side extension
wing on the saw. It's size is appropriate
for saws measuring 27"-28" deep along
the miter slot, and it allows working at the more
open left end of the saw for plenty of routing capacity
and easy access around the router.
All INCRA Router Tables
are shipped with a 3/8" solid aluminum router
mounting plate, pre-drilled for your router,
featuring the exclusive Magna-Lock magnetic throat
plate system. Changing any of the included throat
plates is a snap with the MagnaLOCK System. Just
drop in the selected plate. The high energy, rare-earth
magnets hold the plate secure and perfectly flush
every time. All of our
mounting plates include 3 laser cut throat plates
with a 1", 2-1/8" and 3-5/8" opening.
Rather than the typical router plate leveling set
screws that dig into the table's recess requiring
constant re-adjustment, Incra's plate leveling system
puts flat head levelers in the table, not in the
router mounting plate. Access to these levelers
is through the 10 access holes located around the
perimeter of the mounting plate. Just insert the
hex key in the access holes and turn to adjust.
After leveling, a simple quarter turn of the corner
mounted Cam-Lock securely holds the plate in the
router table's recess.
All table saw based router tables include the TS
Router Table Support Kit with 4 brackets and 2 table
stiffeners. The brackets can be positioned anywhere
along the TS System's rail length and are vertically
adjustable. The support kit is also available separately
to support user made tables. The optional TS Leg
set is a good choice for providing extra support
at your table saw. Just slide the mounting brackets
into the Incra Table Saw Fence System's T-slotted
rails. The legs are horizontally adjustable to fit
any table saw depth. |
 |
|
|
INCRA
28" x 32" TS Router Table Top with TSRTHW
Part Number: TSRT2832R |
|
|
|
| The
28" x 32" Right-hand table serves
double duty as a work surface extension and includes
a full size 3/8" x 3/4" T-Slot Miter channel.
This table is for use with saws measuring 27"-28"
deep along the miter slot that are equipped with
TS-LS or TS-III fence systems. |
|
|
|
INCRA
32" x 21" TS Router Table Top with TSRTHW
Part Number: TSRT3221L |
|
|
|
| The
32" x 21" Left-side router table permits
maximum fence system range and offers open access
from the end of the table saw by sliding the INCRA
positioner assembly down the rails. This table is
sized for saws with oversize cast iron tops measuring
30" - 31" deep along the miter slot. |
|
|
|
INCRA
32" x 32" TS Router Table Top with TSRTHW
Part Number: TSRT3232R |
|
|
|
| The
32" x 32" Right-side router table
serves double duty as a work surface extension and
includes a full size 3/8" x 3/4" T-Slot
Miter channel. This table is sized for saws with
oversize cast iron tops measuring 30" - 31"
deep along the miter slot. |
|
Note: Specify your router preference when placing
an order with your INCRA
dealer. (See PDF for compatibility chart)
|
