:: Precision Fences
    Router Table Fences
    Table Saw Fences
    INCRA I-BOX new
    Router System Accessories
    Router Tables & Stands

 :: Miter Gauges
    Miter Express
    Miter V27
    Miter V120
    Miter V120 Shopsmith
    Miter 1000
    Miter 1000HD
    Miter 1000SE Telescoping Fence
    Miter 3000
    Miter 3000SE Telescoping Fence
    Miter 5000 Miter Sled
    Miter Gauge Combo Pack
    Miter Accessories
    Comparison Chart

 :: Measuring, Marking & Layout
    Squares & Angles
    Marking Rules
    Bend Rules
    T-Rules
    Specialty Rules
    Custom Rules
    Rule Sets
    INCRA Gauge

 :: Jig & Fixture Components
    Build-It System
    Tracks
    T-Tracks
    Miter Sliders
    Miter Channels
    Right Angle Fixture

 :: Books, Plans, Videos &
    Accessories

    Free Plans
    Instructional Videos
    Books & Plans
    Stops
    HingeCrafter

 :: Become an INCRA Insider
 :: Photo Gallery
 :: Perry’s Tool Zone
 :: Parts & Components
 ::
INCRA Awards


 >> IncrementalTools.com
 
 
  FREE STANDING ROUTER TABLE TOPS
24" x 32" Center Mount Router Table
Part Number: RT2432CM
24" x 36" Offset Router Table
Part Number: RT2436OS
27" x 43" Offset Router Table
Part Number: RT2743OS
   
INCRA 24" x 32" Center Mount Router Table Top
Part Number: RT2432CM
Available in 3 sizes for a free standing application. The 24" x 32" center mount
table is a good choice if you are interested in using the Wonderfence37 fence without a positioner. All of our offset style tables are factory pre-drilled for mounting the LS Positioner direct.

All of INCRA's new lineup of heavy duty router table tops feature a 1-1/4" MDF substrate with a high pressure horizontal grade phenolic laminate top and bottom. With a total thickness of 1-3/8", these tops are designed to support even the heaviest of production routers and lifts, and will work with any standard 9-1/4" x 11-3/4" mounting plate.

Rather than the typical router plate leveling set screws that dig into the table's recess requiring constant re-adjustment, Incra's plate leveling system puts flat head levelers in the table, not in the router mounting plate. Access to these levelers is through the 10 access holes located around the perimeter of the mounting plate. Just insert the hex key in the access holes and turn to adjust. After leveling, a simple quarter turn of the corner mounted Cam-Lock securely holds the plate in the router table's recess.

All INCRA Router Tables are shipped with a 3/8" solid aluminum router mounting plate, pre-drilled for your router, featuring the exclusive Magna-Lock magnetic throat plate system. Changing any of the included throat plates is a snap with the Magna Lock System.

Just drop in the selected plate. The high energy, rare-earth magnets hold the plate secure and perfectly flush every time. All of our mounting plates include 3 laser cut throat plates with a 1", 2-1/8" and 3-5/8" opening.
INCRA 24" x 36" Offset Router Table Top
Part Number: RT2436OS
Available in 3 sizes for a free standing application. The 24" x 36" Offset Router
Table Top is our most compact offset router table designed for INCRA Positioning Systems.

With the INCRA LS17 Systems, this table allows 11" capacity between the router centerline and the fence with the positioner's base mounted inside the table's edge, and allows 16" capacity with the base overhanging the right-hand edge. This table is not recommended for the INCRA LS25 Systems. Pre-drilled for the LS positioners; includes an aluminum MagnaLOCK Router Mounting Plate and a preinstalled aluminum miter channel. Use our Router Table Stands to get a head start building a cabinet.
INCRA 27” x 43" Offset Router Table Top
Part Number: RT2743OS
Available in 3 sizes for a free standing application. This 27" x 43" Offset Router
Table is our widest top and is similar in depth to most front-to-rear. This table allows full capacity on the LS 17 Systems. With the LS25 Systems, this table allows 19" capacity between the router centerline and the fence with the
positioner's base mounted inside the table's edge, and allows full capacity with the base overhanging the right-hand edge. Pre-drilled for the LS positioners.
Note: Specify your router preference when placing an order with your INCRA
dealer. (See PDF for compatibility chart)














 
In the table plate leveling
system.
 
3/8" x 3/4" T-Slot Miter
Channel.
 
Cam-Lock 1/4 turn plate
locking.
 
Solid Aluminum Mounting Plate w/MagnaLOCK Throat Plate System.
 
INCRA
CleanSweep Dust Collection
Improved dust collection for all of your router table work!
INCRA
Table
Saw Rail
Support
Legs
Directly support the rails of the TS-LS, TS-III, and TS-II Systems, adding stability to the entire saw platform.
INCRA
8pcs
MagnaLOCK
Ring Set
3/8”, 5/8”, 7/8”, 1 3/8”,
1-5/8”, 1-7/8”, 2-5/8”, 3-3/8”)
 
Click to download
  INCRA’s Table Tops & Plates in Windows Media Video format.

 
Click to download
  Router Tables & Plates
Instructions
in PDF format.