| |  | |
| |  |
| | |
| INCRA
Miter Express |
| As
always, Incra's instructions are second to none - very clear, great diagrams,
well thought through, with components bagged in sequence. When you get an Incra
product, you just know it's going to fit and you know it's going to work. As I
assembled, I kept thinking 'well, I wonder how I'm going to do this or that sort
of cut', only to find that they have thought it all through. As with my Positioning
system, the quality of materials and components is a lesson to the rest of the
world - yes, it's more expensive than competitors but I, for one, will continue
to buy Incra. I now need a bigger workshop so that I can fit a positioning system
to my table saw.
- Dick Powell, England |
| |
| INCRA
TSIII-32 32" Ultra Based Table Saw Fence Positioner |
| it
was worth every penny that I’ve spent. Assembly of the Incra TS III was easy
with the detailed instructions provided.
Minor details, such as shims,
extra bolts for every occasion, and individual hardware packaging allowed for
hassle-free assembly and a touch of class.
- Jeff, from California |
| |
| Thank
You Perry! |
| ...Just
wanted to thank you for your help on the phone tues. about my problem with the
base mount for my table saw. After removing the router mount from the L.S. positioner
base and than mounting it on the red mounting plate it of course lowered every
thing down where it was
suppose to be. Now my T.S. fence works like its suppose
to. I loved my L.S on my router table and now on my table saw its really going
to be great. I
sure enjoyed talking to you on the phone and hope to meet you in person some time.
You and people like you are what makes Incra a great success and keeps customers
coming back!
-
Bob Potter, from Texas |
| |
| INCRA
VDOV1 New Video
|
| This
video made the easy setups for centering even easier. I wished I had viewed it
first. It also shows how to prevent tear out when cutting the outside waste from
the tails.
- John, from Campbell |
| |
| INCRA
Rules |
| |
The price is
great. I would expect to pay twice this price to get even one ruler this accurate
and useful. But here they give you three. You can't go wrong with these.
-
Marc, from Canada |
| | |
| INCRA
Rules |
| My
sweetie purchased the 12" version for my Xmas present...This is the best
gift ever!! No more slop like a tape measure, this rule is the ultimate measuring/marking
tool that I could ever have. Thanks!
- Brian, from Burlington |
| | |
| INCRA
V27 Miter Gauge |
| | Since
I have a nice cross-cut sled that I built to handle all of my 90 degree cuts,
all I really needed was a decent quality miter gauge to handle any angle cutting
or "nibble" cuts that I may need to make on the table saw. This Incra
V27 gauge has been just the solution I was looking for! …I highly recommend
this tool!
- Scott, from Crest Hill |
| | |
| INCRA
Rules |
|
I have
the 6" version and could not imagine getting along without it. Layout is
so much easier... everything from mortises to pulls. Accurate to 1/64, this little
rule has saved me a lot of setup time because I have found that my test cuts end
up being right on target. Be sure you have a mechnical pencil though... it won't
work without one. Check out the regular rules... also very handy.
- Michael,
from Harrisonburg |
|  |
| INCRA
Miter 1000SE |
| ...Every
piece was cut using my Miter 1000SE. I do love the accuracy it allows me. Makes
it look like I've been doing this for decades. Thanks again for the wonderful
tools. I couldn't do it without you guys.
- Bill, from Arizona |
