The
NEW INCRA Miter Express Makes Safe and Easy Mitered
Cuts Part
Number: MITEREXPRESS
INCRA's
new Miter Express offers any miter gauge owner the safest and most accurate cross-cutting
and mitering platform available. Shown above with an optional INCRA Miter 1000SE
mounted and ready, the Express features 2 embedded T-Slot channels to secure the
included Hold Down Clamp and Outboard Fence Support. These slots are also invaluable
for mounting your own custom Jigs and Fixtures.
The fast "Dock
and Lock" system securely locks your miter gauge in just seconds. It
eliminates all side play with our patented miter channel expansion technology.
Even the least expensive miter gauges will experience a tremendous performance
boost when docked on top of the Miter Express.
Doubles
Any Miter Gauge's Crosscut Capacity to 24" and Securely Holds Even the Smallest
Workpieces for Safe Accurate Cuts
The
crosscut capacity of any miter gauge is safely doubled to more than 24" when
docked on top of the Miter Express. For these extra-large crosscuts, the non-drag
support provided by the sliding panel, along with the extra holding power of the
included Hold Down Clamp adds much needed stability and control. As shown on the
right, the same INCRA Hold Down Clamp also keeps your fingers comfortably away
from the blade when cutting workpieces that are too small to safely hold by hand.
The Miter Express also includes an Outboard Fence Support that locks behind
your fence in one of the two T-Slots, providing even more rigidity for all operations.
Assembles
easily and 2 cuts give you zero clearance forever
The
sliding main panel and the locking drop-off support panel are each trimmed with
one simple cut during assembly for a perfect fit on YOUR table saw. The result
is true Zero-Clearance Tearout Control on BOTH sides of the blade. The Miter Express
is instantly removable from your saw table when making rip cuts or other operations
that don't require a sled. And thanks to INCRA's quick release feature, your miter
gauge undocks from the Express in seconds whenever you want to use your gauge
on another tool such as a router table or sanding station.
You
can Dock and Lock ANY BRAND of miter gauge in seconds. Removing
your gauge is just as easy, simply release three locking screws and
lift your gauge out cleanly. There is absolutely no modification required
to your miter gauge for this speedy lock and release feature.
Doubles
any miter gauge's crosscut range up to 24 "
Safely
handles both extra large and extra small workpieces
Eliminates
all side play between table saw's miter slot and any miter gauge
Dual
embedded T-Tracks secure the included Incra Hold-down Clamp and other mitering
accessories
Eliminates
all drag between workpiece and table saw, ESPECIALLY for extra large workpieces
Superb
crosscut and mitering control
The
Miter Express features removable front and rear T-Slot Retaining Clips
for sled stability at both the beginning and end of long crosscuts.
The
INCRA Hold Down Clamp The Miter Express also includes the new
Incra Hold Down Clamp. This makes miter cuts on small pieces more accurate
and secure than ever before while keeping your fingers safely away from the cutter.
"The
Incra Miter Express bridges a gap between large cumbersome
crosscut sleds and smaller units for detail work.
In addition to common 90 degree settings it allows
angle settings too. When coupled with an Incra miter
gauge, it adds increased accuracy to these angle
settings as well. Any sled should make crosscut operations
safer. The T-slot design of the Miter Express and
stock clamp add even more to
the safety aspect."
Click Here to Download INCRA's 
Click Here to Download our 
