|
  |  | | Miter
5000 Part
Number: MITER5000 | The
Miter 5000 blends the incremental angle control features of the Miter 3000SE with
a very special 3-panel Sled for the ultimate miter cutting workstation for the
table saw.
A Renewable Right Panel provides zero-clearance tear-out control
and cut-off support on Both sides of the blade. Two aluminum T-tracks are embedded
in
the MDF panel top to secure an included work piece hold-down clamp and
to provide absolute rigid support for the 36" to 64" telescoping IncraLOCK
Cut-off Fence. Will crosscut a 25" wide board with full control on a standard
10" table saw. The Miter5000 by INCRA delivers perfect, repeatable accuracy.
First
time, Every time, Any angle.
| | Hold
Down Clamp | |  |  | | Included
with every Miter 5000 is this simple and incredibly useful Hold Down
Clamp which locks your workpiece onto the sled for maximum
accuracy and the cleanest cuts possible. It only takes seconds
to use and provides the rigidity needed for world class results.
| |
| | | 
 | | | Miter
5000 Sled for Shopsmith | In
cooperation with Shopsmith engineers, this version of the Miter 5000 Sled
has
been specifically adapted to the Shopsmith Mark V Series. This is the only Shopsmith
authorized miter sled on the market.
Miter
5000 Sled Replacement Panel In Use
The Miter
5000 Sled is customized exactly for your own saw by installing the entire sled
and then making a single cut through the right panel to give you a "zero
clearance" sled edge for excellent workpiece support. This newly separated
sled panel is then locked in place using the included miter channel locking devices
(Incra Miter Sliders). Easily removed and reattached this panel is permanently
used unless you change saws. Obviously any "zero clearance" cut will
be in the wrong place should you change table saws and having a replacement panel
available keeps maintains the remarkable value of your
Miter 5000.
To
replace your panel, you simply remove the secondary panel at the T-Slot extrusion
and then attach your replacement panel. Once again you make a "zero clearance"
cut of the new panel and attach the resulting piece as before. Below you can see
the same exact setup with a lefttilt Shopsmith saw.
| 
| |  | 
GlideLOCK Miter Bar
Six expansion disks adjust both
sides of the bar for ZERO side play, anti-friction travel on
all table saws with standard 3/4" x 3/8" or near-standard
miter gauge channels, including Delta, Craftsman, imports, etc.
This means that all of INCRA's incredible precision will actually
show up in your work because the bar CAN'T wiggle around in
the miter slot. | |
| | | | |  | | |
Special Edition Telescoping
INCRA-LOCK Fence
This
Special Edition Miter Fence telescopes from 18' to a full 31'
length. Includes the Dual Flip Shop Stop and Incra's patented
Automatic Positioning Control. | |
| | | | |  | | |
AngleLOCK Indexing
Precision angle indexing teeth are
laser cut in solid steel to lock in 364 positive angle stops
in 1/2°, 1° or 5° increments over a full 180°
range. it's also continuously adjustable between
1/2° steps. | |
|
| |  | | |  | 
Click Here to
Download
INCRA's
IncraLOCK
Video in
Windows Media Video
format.
| |
Click Here to
Download
INCRA's AngleLock
Video in Windows Media Video
format.
|  |
Click Here to Download
INCRA's GlideLock
Video in Windows Media
Video format.
|
|  |
|
| | | Incra
FlipShopStop shown with both arms down and one of the included steel rods.
| | FlipShopStop
one arm up, one down. Shown with included short steel rods.
|  | FlipShopStop
both arms up.
|  | Interlocking
grooves in the fence and stop ensure even the sharp edge of mitered work will
not push behind the stop. Accuracy is guaranteed.
|  | Fence
Locking Bracket
Creates a monolithic rigid
platform and fence when
tightened
down. Quickly
set using the included standard hex tool, this feature takes
an already strong platform into the rigidity level expected in
any professional
machining environment.
|  | |
Replacement Right
Sled Panel
Get zero clearance for
an additional
angle cuts
or just use as a replacement.
Contact your local
dealer
or INCRA to order. | | |  |
"The
Incra 5000 Miter
Sled is hardly a new
product,
except for my
shop. I have seen it
used
at shows, and it
is clearly one more well
designed
and executed
product from Incra.
And,
it is a welcomed
addition to my shop.
It
will coming
particularly handy in
the
next weeks as
Beth and I take on a
number
of small box
projects."
- Woodshopdemos.com | | |
|
