|
 |  | | INCRA
Miter 1000HD |  | Part
Number: MITER 1000/HD |
|  | |
The
Mitering Solution for your Table Saw is Perfectly Clear -
High Definition
from INCRA. | The
NEW INCRA Miter 1000HD is the most refined model yet in the Miter 1000 series.
The HD stands for High Definition, because the protractor plate's exclusive AngleLOCK
Indexing System has a whopping 180
can't-miss angle stops in 1° increments
with special stops located at 22-1/2°. Combine that high-resolution protractor
with the industry's smoothest adjustable miter
bar, a telescoping IncraLOCK
Cut-off Fence & Flip Shop |  | |
Stop, and a steel vernier scale that reads to 1/10°, and you've got a winner
that will improve the quality of any project. Are you cutting parts for segmented
turning? The Miter 1000HD will allow you to precisely set and quickly duplicate
any angle you might need, whether it's 18° for cutting 10 sides, 25.7°
for 7-sided objects, or anything else imaginable. |
| | | 
| |  | 
GlideLOCK Miter Bar
Six expansion disks adjust both
sides of the bar for ZERO side play, low-friction travel on
all table saws with standard miter gauge
channels,
including Delta, Craftsman, imports, etc. An excellent fit in
the channel directly transfers the Miter 1000HD's incredible
accuracy directly to your project. The Miter 1000's
adjustable miter bar will fit square-sided miter slots measuring
3/4" wide, 3/8" deep,
and with or without a 15/16"
T-slot at the
bottom. The miter bar's adjustment range accommodates
actual slot widths between 0.740" and 0.765". | |
| | | | | 
| | |
Telescoping IncraLOCK Fence
This Miter Fence telescopes
from 18" to a full
31" length and features a front
T-slot for adding a wooden zero-clearance sub fence. The
Miter 1000HD's Flip Shop Stop is equipped with INCRA's
patented incremental positioning racks for incredible cut-length
accuracy and 100% day-to-day repeatability. | |
| | | | |  | | |
1/10th° Vernier Cursor
Precision angle indexing teeth
are laser cut in solid steel to lock in positive angle stops
every 1° over a 180° range, with special stops at
22-1/2°.
A stainless steel vernier cursor delivers an incredible 1/10th°
resolution between fixed steps. | |
|
| | | INCRA
manufactures the only Miter Gauges in the world
that are accurate enough to
produce gap-free hairline glue
joints on the mitered corners of any multi-sided
object
without trial-and-error setups.
WE GUARANTEE IT! |
| | |  | 
To watch the INCRA Miter
1000HD Video click
here.
| |
To watch the complete INCRA
Miter Gauge
video click here.
(31.7MB,
PLEASE
BE PATIENT - this
may take several minutes to load) |
|  |
| |
| | | 18"
to 31" Telescoping Fence.
| | 1/10
degree vernier cursor.
|  | Dual
arm Flip Shop Stop
for multiple-cut length setups.
|  | |
Replacement
Flip Fence
(27"-49" & 36" to 64")
Telescoping
Flip Fence
with 27”
to 49" length and 36"
to 64" length. | | | INCRA
Miter Channel
Works with INCRA Miter Sliders and INCRA Miter Gauges
or any standard 3/8" by 3/4" miter bar. |
|
