| | |   |  | Locate
ANY cut on ANY machine EXACTLY
where you want it. Available 18", 36"
& 52" lengths
(shown here with optional
ShopStop)
Part
Number: TRACKSYS18, TRACKSYS36 & TRACKSYS52
 | The
INCRA Track System is the optimum solution to any cutting operation that requires
accuracy, repeatability, multiple stop positions, or just plain ease of use. It
will dramatically increase the precision and performance of
your Miter Gauge,
Drill Press, Miter Saw, Radial Arm Saw , and an unlimited variety of shop-
made
jigs and fixtures. | |
The
key is INCRA's patented sawtooth racks which position your work instantly
and
automatically in EXACT 1/32" steps with true machine shop precision without
measuring . It's also micro adjustable to fine-tune your position anywhere
between
fixed steps.
Maximum Versatility
The INCRA
Track System was designed for maximum versatility in your woodworking shop.
Multiple
T-slots and through holes provide a means for quickly and easily
attaching
these rigid aluminum track sections to virtually any woodworking tool.
Shop-made
wooden subfence, used to provide splinter-free zero clearance support or to extend
fence length or height, slides directly into a T-slot along the Track's front
face. The heart of the System, the INCRA Shop Stop, is expandable to accommodate
any fence thickness up to 1-1/2". It's vertically adjustable to accommodate
any fence height up to 3-1/2".
It's micro adjustable for 1/1000"
precision. And, of course, it can be instantly
set (or reset) to any position
with machine shop accuracy and ZERO repeatability error. A precision sliding
reference scale is included with each Track section. Tracks are available in 18",
36", and 52" standard lengths. Each rigid aluminum Track section
also features multiple T-slots, mounting holes, and complete hardware for installation
on just about any tool. Choose the length that best suits your needs. | |  | Easy
Installation | 
| | | INCRA
Track attaches directly to just about any horizontal or vertical surface, so it
will easily
mount to all of your favorite tools. Mounting hardware is included.
Easy installation on
almost every power tool, jig and fixture in your shop.
Solid aluminum linear tracks available in
18", 36", and 52"
lengths, feature five T-slots, multiple mounting holes, hardware and
illustrated
instruction manual. |
|  | | Miter
Gauge |  | | | Improve
the performance of any miter gauge, and put an end to trial and error cuts forever.
You'll find your crosscuts not only accurate, but repeatable as well.
|
| | | Zero
Clearance Fence |  | | | A
shop-made wooden subfence slides directly
onto the Track's front face to provide
splinter-free zero clearance support for all of your cuts.
|
| | | Jigs
& Fixtures |  | | | We
call INCRA Track the Jig-Makers Jig! Now
you can add INCRA's famous precision
and repeatability to all of those one-of-a-kind shop-made jigs and fixtures that
are so useful for specialty operations and production work.
The crosscut sled
shown here is just one
example. |
| | | Miter
Saw |  | | | Add
INCRA Track's incremental precision to both sides of the blade, and throw out
your tape measure. This is what every Miter Saw needs! Track sections can be cascaded
for unlimited crosscutting capacity. |
| | | Drill
Press |  | | | Work
at your drill press is quicker, easier, and far more accurate with the INCRA Track
System. You'll find it particularly useful for holes such as counterbores which
require more than one bit and multiple synchronized drilling operations.
|
| | | Radial
Arm Saw |  | | | Add
a precision incremental fence to your Radial Arm Saw. Track sections can be mounted
end-to-end for unlimited crosscut capacity. Works on
both sides of the blade.
|
| | |
|
| | | The
INCRA Track System was designed for
maximum versatility in
your woodworking
shop. Multiple T-slots and
through holes provide a means for quickly and
easily
attaching these
rigid aluminum track sections to virtually
any woodworking
tool.
| |  | INCRA
Shop Stop
Incra ShopStop show
here in EXPANDED
mode with a
sacrificial
fence.
This change only takes
seconds. Simply loosen
the two adjustment
knobs on top and slide
the T-Nut connectors
out
of the rear slot and
into the front slot.
Tighten snugly and you
are
ready for expanded
usage with a 3/4"
sacrificial fence made
from
any appropriate material. |
|
