free standing Router Table tops

precision fences > router tables & stands

Free Standing Router Table Tops

Free standing router table tops

Part Number: RT2432CM, RT2436OS & RT2743OS (RT2432CM shown here)



All of INCRA's new lineup of heavy duty router table tops feature a 1-1/4" MDF substrate with a high pressure horizontal grade phenolic laminate top and bottom. All INCRA Router Tables are shipped with a 3/8" solid aluminum router mounting plate, pre-drilled for your router, featuring the exclusive MagnaLOCK™ Magnetic Throat Plate System. Available in 3 sizes for a free standing application.

Rather than the typical router plate leveling set screws that dig into the table's recess requiring constant re-adjustment, INCRA's plate leveling system puts flat head levelers in the table, not in the router mounting plate. Access to these levelers is through the 10 access holes located around the perimeter of the mounting plate. Just insert the hex key in the access holes and turn to adjust. After leveling, a simple quarter turn of the corner mounted Cam-Lock securely holds the plate in the router table's recess.

All INCRA Router Tables are shipped with a 3/8" solid aluminum router mounting plate, pre-drilled for your router, featuring the exclusive Magna-Lock magnetic throat plate system. Changing any of the included throat plates is a snap with the MagnaLOCK System.

Just drop in the selected plate. The high energy, rare-earth magnets hold the plate secure and perfectly flush every time. All of our mounting plates include 3 laser cut throat plates with a 1", 2-1/8" and 3-5/8" opening.



INCRA 24" x 32" Center Mount Router Table Top

INCRA 24" x 32" Center Mount Router Table Top
INCRA 24" x 32" Center Mount Router Table Top
Part Number: RT2432CM
> more info


24" x 32" Center Mount Router Table Dimensions
The 24" x 32" Center Mount Table is a good choice if you are interested in using the Wonder Fence without a positioner. All of our offset style tables are factory pre-drilled for mounting the LS Positioner direct.



Note - This table is not compatible with the unique Mast-R-Lift-II-R sold by Rockler, which uses a narrower 8-1/4"-wide top plate.

Router plate size:
9-1/4" x 11-3/4" x 3/8"

Actual table size:

23.580" x 31.580" +/-0.020"

Table thickness:

1.350" +/-0.020"


INCRA 24" x 36" Offset Router Table Top

INCRA 24" x 36" Offset Router Table Top
INCRA 24" x 36" Offset Router Table Top
Part Number: RT2436OS
> more info



INCRA 24" x 36" Offset Router Table Top Dimensions
The 24" x 36" Offset Router Table Top is our most compact offset router table designed for INCRA Positioning Systems.

With the INCRA LS17 Systems, this table allows 11" capacity between the router centerline and the fence with the positioner's base mounted inside the table's edge, and allows 16" capacity with the base overhanging the right-hand edge. This table is not recommended for the INCRA LS25 Systems. Pre-drilled for the LS positioners; includes an aluminum MagnaLOCK™ Router Mounting Plate and a preinstalled aluminum miter channel. Use our Router Table Stands to get a head start building a cabinet.

Note - This table is not compatible with the unique Mast-R-Lift-II-R sold by Rockler, which uses a narrower 8-1/4"-wide top plate.

Router plate size:
9-1/4" x 11-3/4" x 3/8"

Actual table size:
23.580" x 35.580" +/-0.020"

Table thickness:

1.350" +/-0.020"



INCRA 27" x 43" Offset Router Table Top

INCRA 27" x 43" Offset Router Table Top
INCRA 27ظع€ظظع€ع€ظ¤ظق”،آ€ظع€ظق•ظ x 43" Offset Router Table Top
Part Number: RT2743OS
> more info


INCRA 27" x 43" Offset Router Table Top Dimensions
This 27" x 43" Offset Router Table is our widest top and is similar in depth to most front-to-rear. This table allows full capacity on the LS 17 Systems.

With the LS25 Systems, this table allows 19" capacity between the router centerline and the fence with the positioner's base mounted inside the table's edge, and allows full capacity with the base overhanging the right-hand edge. Pre-drilled for the LS positioners.

Note - This table is not compatible with the unique Mast-R-Lift-II-R sold by Rockler, which uses a narrower 8-1/4"-wide top plate.

Router plate size:
9-1/4" x 11-3/4" x 3/8"

Actual table size:
26.830" x 43.455" +/-0.020"

Table thickness:
1.350" +/-0.020"


*Note: Specify your router preference when placing an order with your INCRA dealer. (See PDF for compatibility chart).




detail focus

In the table plate leveling system

In the table plate leveling system.

3/8" x 3/4" T-Slot Miter Channel

3/8" x 3/4" T-Slot Miter Channel.

Cam-Lock 1/4 turn plate locking

Cam-Lock 1/4 turn plate locking.

Solid Aluminum Mounting Plate w/MagnaLOCK Throat Plate System

Solid Aluminum Mounting Plate w/MagnaLOCK™ Throat Plate System.

downloads

Image

Click to download Router Tables & Plates Instructions in PDF format.

Image

Click to download INCRA Aluminum MagnaLOCK™ Plate Selection Chart in PDF format.

video demos

Image

Click to download INCRA Router Table Tops & Plates Video in Windows Media format.